In most modern engineering fields, composites’ most advanced physical features are more used against conventional metallic and alloying materials. Bioplastics have been developing in the last ten years to replace synthetic plastics. Synthetic mixing with biological (hybrid) materials and using fully biodegradable materials have been included in recent innovations. Researchers have become particularly concerned with reducing their use of synthetic plastics because of environmental problems caused by plastic waste, not biodegradable. The tensile strength of 6% nanosilica mixed specimens showed the highest tensile stress rate as 36.93 MPa the value was nearly 3.5% higher than the 4% nanosilica mixed composite specimens. Concerning adding the growing weight percentage (4 percent) of nanosilica particles to the composites, the water absorption properties of the composites have significantly improved.

Composites contain 6 percent of the fine nanosilica particles by weight. The test findings reveal the significant improvement in the tensile and flexural properties of the composites. The tensile, compression, flexural, impact, hardness, and water absorption tests were performed on the composite specimens to assess various mechanical properties and absorbance behaviour. According to the ASTM standards, the process to machine, the composite specimens have been adopted from the water jet machining process. By changing the weight percentage of nanosilica particulate matter (0, 2, 4, 6, and 8 percent) with PLA and water hyacinth fibres, five composite mates were produced through a double screw extruder and compression moulding machine. Box-2925, Riyadh 11461, Saudi Arabiaħ Zoology Department, College of Science King Saud University, Riyadh 11451, Saudi ArabiaĨ College of Environmental & Bioresource Sciences, Chonbuk National University, Iksan 570752, Republic of Koreaĩ Department of Mechanics, Seenu Atoll School, Hulhumeedhoo, Addu City 19060, Maldives Show moreīiocomposites with polylactic acid (PLA), nanosilica parts, and water hyacinth fibres have been developed in this experimental study. 1 Department of Packaging, Yonsei University, Wonju-Si 26493, Gangwon-Do, Republic of KoreaĢ Department of Electronics and Communication Engineering, Jeppiaar Engineering College, Chennai 641407, Tamil Nadu, Indiaģ Department of Mechanical Engineering, Bharath Institute of Higher Education and Research, Chennai 641407, Tamil Nadu, IndiaĤ Department of Electronics and Communication Engineering, Malla Reddy Engineering College, Secunderabad 500100, Telangana, Indiaĥ Department of Mechanical Engineering, Lincoln University College, Petaling Jaya, Selangor, MalaysiaĦ Department of Physiology, College of Medicine and King Khalid University Hospital, King Saud University, Medical City, P.O.

Astm standards